Products ATEX Weighing ATEX scale

Stainless steel scales "Easy Pesa 3GD" series, for ATEX zones 2 and 22

Estimated delivery within 4-7 working days
Stainless steel scales "Easy Pesa3GD"series,forATEXzones2and22

Fully stainless steel bench scales, for specific use in ATEX hazardous areas. Powered by a long lasting rechargeable battery which allows an easier installation directly where it's needed. These scales don't need a power supply socket in dangerous zone nor ATEX proof power supply cables. Provided with the ATEX declaration of conformity. Ex II 2G IIC T4 Gb X and Ex II 2D IIIC T197°C Db X protection.


Automatic tare
Presettable tare
Selectable function command
On/off switching.


High Resolution Weighing x 10
Net/Gross or lb/kg conversion
Weight totalization
Formula weighing
+/- Checkweighing
Counting (Max. resolution of 1.500.000 divisions)

Download Brochures:
Easy_Pesa_3GD (633.81 kB)


  • Approved “single point” STAINLESS STEEL load cell according to OIML R60 standards with protection against dust and water splashes according to IP67 stdards.
  • ATEX approved load cell with ATEX protection:
  • ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga.
  • ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
  • Structure, enclosure and loading plate made in AISI304 satin finish stainless steel.
  • Adjustable levelling feet with plastic over shoe.
  • Supplied with support column, height:
    • 500 mm in the "Q" models;
    • 700 mm in the "X" models.


  • IP68 Weight indicator for ATEX zones with protection methods according to:
  • ATEX II 3G Ex nR IIC T6 Gc X for gases.
  • ATEX II 3D Ex tc IIIC T130°C Dc IP68 X for dust.
  • EC-Type-Examination certificate according to Annex III (ATEX directive). CE-M approvable (OIML R-76 / EN 45501).
  • Waterproof 17-key numerical and functional keyboard.
  • Backlight LCD display with 6 25-mm high contrast digits, clearly visible even in poor lighting conditions and with low temperatures, and with 6 LEDs for showing the active functions.
  • Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
  • Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
  • A/D 24-bit sigma-delta conversion, up to 100 conv./sec. autoselect.
  • Power supply through external battery pack with 160h operating time. An extra battery pack for continuous use (24/7) is available as option.
  • Charger included in the supply.

BP6ESTATEX3GD:IP65 stainless steel, external ATEX battery pack, for 2 and 22 zones. For Dini Argeo ATEX 3GD instruments. ATTENTION: rechargeable in safe zone only, connectable and disconnectable from the weighing system also in hazardous area. (Battery charger not included).