Safety Factor : Designed to 5:1.
Proof Load : Each system proof-loaded to 200% of capacity (certified) up to a test force of 400t.
Accuracy : ± 0.1% of full range.
Display : 5 digit: ½" (12mm), liquid crystal display and annunciator; two-level overload state, max. value (peak hold), low battery, tare state (gross or net), measuring units, sleep mode, charge, and programming instructions. Standard number of measurements per second: 1.
Functions : Zero. Tare. Low battery warning. Max. (peak hold). Two-level overload visual alarms. User calibration. Sleep mode after 60 sec. at zero value, awakes automatically when loaded.
Units : Available in the following measurement readings: metric tons, short tons (2000 lbs), kgs, lbs (lbs x 10 for capacities of 50t and above), newtons, deca newtons, k. newtons.
Load Cell Material : Made of high-strength, aerospace quality, alloy steel, polyurethane coated.
Indicator Material : High quality ABS.
Power : 3 x AA ("finger") 1.5 Volt, Alkaline disposable batteries. Batteries rated 3AH will function for at least 2000 hours (at least three months of continuous working). Occasional use will extend the life of the batteries up to several years. Adding certain options will shorten the life of the batteries. All settings retained at power off.
Calibration : User calibration. Initial factory calibration, fully traceable (certified).
Temperature Range : -15°F to +175°F
(-25°C to +80°C)
Environmental : Weatherproof, NEMA 4, IP65.
- Additional spare cable in 15ft/5m increments
- Carrying case
- Dampened (average) display for unstable load
- Fatigue rated load cell
- Indicator belt clip
- IP 67 load cell with special off-shore connectors
- IP 68 load cell with underwater capability
- Longer extension cable in 15ft/5m increments
- Number of measurements per second: 2/3/4/5/6/7/8/20, factory set
- Rechargeable batteries, with an external charger for charging the batteries inside the system.
RON 2000 - S
Optional carrying case