Email
Products ATEX Weighing ATEX LOAD CELLS Column
DINI ARGEO ANALOGUE COLUMN LOAD CELL "RCPT" SERIES
Estimated delivery within 4-7 working days
SKU
DINI ARGEO ANALOGUE COLUMN LOAD CELL "RCPT" SERIES
Description:
Column load cell for CE-M approved weighbridges, tanks, silos, etc.
ATEX Version
- The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
- ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
- ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.
- The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
- IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.
MAIN FEATURES
- Special alloy steel body with stainless steel external casing; manufactured with laser solderings.
- Optimised for parallel connection.
- Ip68 protection rating.
- Capacity from 20000 to 50000 kg.
- Shielded 18m connection cable.
- Test certificate available upon request.
- Fitted with self-aligned articulated joints, selfcentering plates and protection washer (version with cups).
TECHNICAL FEATURES
- Minimum load cell verification interval: Vmin = EMax / 10.000
- Maximum number of load cell divisions: nLC = 3000 (C3)
- Sensitivity: 2mV/V +/- 0,1%
- Temperature effect on full scale: 0,002% /°C
- Temperature effect on zero: 0,002% /°C
- Compensated Temperature Range: -10°C/+40°C
- Operating Temperature Range: -30°C/+70°C
- Creep error after 30 minutes: 0,02% F.S.
- Excitation voltage from 5 to 15 VDC
- Input Resistance: 700 ± 20 Ohm
- Output Resistance: 703 ± 7 Ohm
- Zero Balance: +/-1% F.S.
- Insulation Resistance: >5000 MOhm
- Safe Overload: >150% F.S.
- Ultimate Overload: 250% F.S.
- 4-wire shielded cable, 18 m long, 5mm diameter.
